EasyCut Templates from PCA

Code: TP7163EC

A selection of four edges to create that lovely Embossed Border/Frame or EasyCut Border/Frame. After completing all embossing/perforating, re-position paper back on template 'facing downwards'. Line up pattern and EasyCut Slot line. Emboss Clear EasyCut Slot line with your PCA Small Ball tool. Then using your PCA Scriber, carefully cut around the slot line. (Note: as with all PCA® EasyCut templates. You do not have to always cut the paper. You can simply Emboss the EasyCut Slot line when doing the initial embossing to achieve a different result) 

  NEW!

Code: TP7162EC

As with all EasyCut templates, they may be used just as an EasyEmbossing Template if desired. This is a 3D card where the centre pops up when opened. Use template as is or add your own additional embossing perforating and colouring. Use your PCA E3012 Micro Ball tool to emboss the tracks. Watch Video #76 on our YouTube channel to see a full demonstration of how to construct the Pop Up Rose card. (the video will help you understand how the pop up cards work. Follow Fold and Cut line instructions on Template) You will be extremely pleased with your results.

  NEW!

Code: TP7161EC

As with all EasyCut templates, they may be used just as an EasyEmbossing Template if desired. This is a 3D card where the centre pops up when opened. Use template as is or add your own additional embossing perforating and colouring. Use your PCA E3012 Micro Ball tool to emboss the tracks. Watch Video #76 on our YouTube channel to see a full demonstration of how to construct the Pop Up Rose card. (the video will help you understand how the pop up cards work. Follow Fold and Cut line instructions on Template) You will be extremely pleased with your results.

  NEW!

Code: TP7160EC

As with all EasyCut templates, they may be used just as an EasyEmbossing Template if desired. This is a 3D card where the centre pops up when opened. Use template as is or add your own additional embossing perforating and colouring. Use your PCA E3012 Micro Ball tool to emboss the tracks. Watch Video #76 on our YouTube channel to see a full demonstration of how to construct the Pop Up Rose card. (the video will help you understand how the pop up cards work. Follow Fold and Cut line instructions on Template) You will be extremely pleased with your results.

 NEW!

Code: TP7159EC

As with all EasyCut templates, they may be used just as an EasyEmbossing Template if desired. This is a 3D card where the centre pops up when opened. Use template as is or add your own additional embossing perforating and colouring. Use your PCA E3012 Micro Ball tool to emboss the tracks. Watch Video #76 on our YouTube channel to see a full demonstration of how to construct the Pop Up Rose card. (the video will help you understand how the pop up cards work. Follow Fold and Cut line instructions on Template) You will be extremely pleased with your results.

 NEW!

Code: TP7158EC

As with all EasyCut templates, they may be used just as an EasyEmbossing Template if desired. This is a 3D card where the centre pops up when opened. Use template as is or add your own additional embossing perforating and colouring. Use your PCA E3012 Micro Ball tool to emboss the tracks. Watch Video #76 on our YouTube channel to see a full demonstration of how to construct this card. You will be extremely pleased with your results.

Code: TP7157EC

A new EasyCut template for either embossing or cutting. This template gives you three designs of an envelope flap (all of which are interchangeable). View the latest video #75 on YouTube to see how to fold the envelope. 

Code: TP7154EC

Comprises of three different size frames. Emboss using your PCA-E3012 Micro Ball tool. Very easy with excellent results. After completing all embossing/perforating, re-position paper back on template 'facing downwards'. Line up inner oval to ensure card is in position. Using your PCA Small Ball tool, emboss the Clear EasyCut Slot Line. Then using your PCA Scriber or small craft knife, carefully cut around the slot line. 

Code: TP7153EC

Comprises of two different size frames. Emboss using your PCA-E3012 Micro Ball tool. Very easy with excellent results. After completing all embossing/perforating, re-position paper back on template 'facing downwards'. Line up inner circle to ensure card is in position. Using your PCA Small Ball tool, emboss the Clear EasyCut Slot Line. Then using your PCA Scriber or small craft knife, carefully cut around the slot line. 

Code: TP7152EC

A selection of four edges to create that lovely Embossed Border/Frame. Emboss using your PCA-E3012 Micro Ball tool. After completing all embossing/perforating, re-position paper back on template 'facing downwards'. Line up pattern and EasyCut Slot line. Emboss Clear EasyCut Slot line with your PCA Small Ball tool.    Then using your PCA Scriber, carefully cut around the slot line. (Note: as with all PCA® EasyCut templates. You do not have to always cut the paper. You can simply Emboss the EasyCut Slot line when doing the initial embossing to achieve a different result)  Add your own perforating, colouring.

Code: TP7151EC

 Emboss using your PCA-E3012 Micro Ball tool. Very easy with excellent results. After completing all embossing/perforating, re-position paper back on template 'facing downwards'. Line up inner rectangle corner markers to ensure card is in position. Using your PCA Small Ball tool, emboss the outer Clear EasyCut Slot Line. Then using your PCA Scriber, carefully cut around the slot line. (Note: as with all PCA® EasyCut templates. You do not have to always cut the paper. You can simply Emboss the EasyCut Slot line when doing the initial embossing to achieve a different result)  Add your own perforating, colouring.

Code: TP7150EC

EasyCut Inside/Outside Sympathy- 2 Template. Inside/Outside because you are actually making the Front Cover and also an inside page at the same time. This template has been designed for A6 size cards.  Follow the instructions at the top of this page.

Code: TP7149EC

EasyCut Inside/Outside Sympathy- 2 Template. Inside/Outside because you are actually making the Front Cover and also an inside page at the same time. This template has been designed for A6 size cards.  Follow the instructions at the top of this page.

Code: TP7148EC

EasyCut Inside/Outside Birthday- 2 Template. Inside/Outside because you are actually making the Front Cover and also an inside page at the same time. This template has been designed for A6 size cards.  Follow the instructions at the top of this page.

Code: TP7147EC

EasyCut Inside/Outside Birthday- 2 Template. Inside/Outside because you are actually making the Front Cover and also an inside page at the same time. This template has been designed for A6 size cards.  Follow the instructions at the top of this page.

Code: TP7146EC

EasyCut Inside/Outside Birthday- 1 Template. Inside/Outside because you are actually making the Front Cover and also an inside page at the same time. This template has been designed for A6 size cards.  Follow the instructions at the top of this page.

Code: TP7144EC

Fine CrossHatch Template. A simple but delicate gift box. Ideal for small items or sweets etc.Designs already engraved to be used. However, you may simply emboss the main outline and fold lines, an then place the blank pillow box over any of the PCA background templates to create a new design.

Code: TP7142EC

Fine CrossHatch Template. A simple but delicate gift box. Ideal for small items or sweets etc.Designs already engraved to be used. However, you may simply emboss the main outline and fold lines, an then place the blank pillow box over any of the PCA background templates to create a new design.

Code: TP7139EC

EasyCut Large Christmas Star template. Makes a beautiful star for the tree. Either just make the one and glue onto a card, or make two and glue back to back. Add some string and hang on the tree. Emboss lines with PCA-E3012 Micro Ball Tool. Add your own perforating, colouring and embossing.  

Code: TP7137EC

The pack contains two templates. The first step is to Emboss the main box template and then the lid template using your PCA Micro Ball Tool. Emboss the White lines only. Once you have completed embossing the frames, remove parchment paper from the template and complete any perforating and embossing you may wish to add. After you have finished this step turn the parchment paper over so that it is "FACE UP" and position it back on the template. Line it up carefully with centre embossed squares. Ensure that your embossed line matches up with the embossed line on the template. While doing this ensure that the Clear EasyCut Slot line is even all around the frame. Once happy with the positioning, press firmly in position on to the Blu-Tack dots or use tape.

Emboss the Clear EasyCut Slot lines using your PCA Small Ball tool. After you have embossed the Slot line, now use your PCA Scriber tool or a Small Craft Knife to cut out the small diamonds. Once completed, cut around the outside of both the box and lid. Making sure that you "Break the Paper" each time you start a new cut. When you have finished cutting this outer edge remove the parchment paper from the template. Once all sides have been folded you may now glue the gluing tabs together.

Code: TP7134EC

 The first step is to Emboss the butterflies using your PCA Micro Ball Tool. Emboss the White lines only. You can choose to emboss all four, or three or just two. Once you have completed embossing the Butterflies, remove vellum from the template and complete any perforating and embossing you may wish to add. After you have finished this step turn vellum over so that it is "FACE UP" and position it back on the template. Line it up carefully with one of the butterflies. Ensure that your embossed line matches up with the embossed line on the template. While doing this ensure that the EasyCut Clear line is even all around the butterfly. Once happy with the positioning, press firmly in position on to the Blu-Tack dots or use tape.

Emboss the Clear EasyCut Slot line using your PCA Small Ball tool. After you have embossed the Slot line, now use your PCA Scriber tool to cut around the outside of the chosen butterfly. Making sure that you "Break the Paper" each time you start a new cut. When you have finished cutting this butterfly, remove it from the template and reposition vellum over the next butterfly. Line up as before. Complete these steps with each butterfly.

When you have completed all butterflies, assemble by bending inwards slightly (ie: folding wings). 

Code: TP7133EC

 The first step is to Emboss the butterflies using your PCA Micro Ball Tool. Emboss the White lines only. You can choose to emboss all four, or three or just two. Once you have completed embossing the Butterflies, remove vellum from the template and complete any perforating and embossing you may wish to add. After you have finished this step turn vellum over so that it is "FACE UP" and position it back on the template. Line it up carefully with one of the butterflies. Ensure that your embossed line matches up with the embossed line on the template. While doing this ensure that the EasyCut Clear line is even all around the butterfly. Once happy with the positioning, press firmly in position on to the Blu-Tack dots or use tape.

Emboss the Clear EasyCut Slot line using your PCA Small Ball tool. After you have embossed the Slot line, now use your PCA Scriber tool to cut around the outside of the chosen butterfly. Making sure that you "Break the Paper" each time you start a new cut. When you have finished cutting this butterfly, remove it from the template and reposition vellum over the next butterfly. Line up as before. Complete these steps with each butterfly.

When you have completed all butterflies, assemble by bending inwards slightly (ie: folding wings). 

Code: TP7108EC

 Small tight curves require the use of only the PCA Scriber. Straight lines and larger curves may be cut using either tool. Choose the frame you require. Place your finished card on the template (Face Up), hold in place using small dots of blu-tack or tape. Centre the card within the selected frame. Emboss the frame line using a PCA Small Ball tool. Then cut using either the PCA Scriber or Small Craft Knife. (we recommend using a longer fine blade in the craft knife). Watch the demonstration videos on YouTube. 

Code: TP7107EC

 Small tight curves require the use of only the PCA Scriber. Straight lines and larger curves may be cut using either tool. Choose the frame you require. Place your finished card on the template (Face Up), hold in place using small dots of blu-tack or tape. Centre the card within the selected frame. Emboss the frame line using a PCA Small Ball tool. Then cut using either the PCA Scriber or Small Craft Knife. (we recommend using a longer fine blade in the craft knife). Watch the demonstration videos on YouTube. 

Code: TP7106EC

 Small tight curves require the use of only the PCA Scriber. Straight lines and larger curves may be cut using either tool. Choose the frame you require. Place your finished card on the template (Face Up), hold in place using small dots of blu-tack or tape. Centre the card within the selected frame. Emboss the frame line using a PCA Small Ball tool. Then cut using either the PCA Scriber or Small Craft Knife. (we recommend using a longer fine blade in the craft knife). Watch the demonstration videos on YouTube. 

Code: TP7105EC

 Small tight curves require the use of only the PCA Scriber. Straight lines and larger curves may be cut using either tool. Choose the frame you require. Place your finished card on the template (Face Up), hold in place using small dots of blu-tack or tape. Centre the card within the selected frame. Emboss the frame line using a PCA Small Ball tool. Then cut using either the PCA Scriber or Small Craft Knife. (we recommend using a longer fine blade in the craft knife). Watch the demonstration videos on YouTube. 

Code: TP7104EC

 Small tight curves require the use of only the PCA Scriber. Straight lines and larger curves may be cut using either tool. Choose the frame you require. Place your finished card on the template (Face Up), hold in place using small dots of blu-tack or tape. Centre the card within the selected frame. Emboss the frame line using a PCA Small Ball tool. Then cut using either the PCA Scriber or Small Craft Knife. (we recommend using a longer fine blade in the craft knife). Watch the demonstration videos on YouTube.