PCA Fine Perforating Tools (F1001 - F1041)

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1004

The Stamp Edge tool can be used to make perforations that will easily separate to make a simple edging, though not as neat as the edging produced with scissors or snips, it is simple and quick.  Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1005

The Fine Quad tool can be used to make squares with the centres embossed or snipped out. It can be used with the Fine FlexiDuo grids.  Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1006

The Fine Easy Cross Mark 2 tool cuts a neat cross shape into parchment in one go, it has now been redesigned  so that it may now be used in conjunction with the PCA Fine Straight or Fine Diagonal FlexiDuo Grids for the first shallow perforation. It is now basically two tools in one. First perforation gives you your four needle quad shape. If using a grid, remove paper from grid then Perforate deeper and your EasyCross will be created. There is also included a small cross tool support.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1007

The Fine Standard Quin tool can be used to make linked patterns or on its own. It can also be used with the Fine FlexiDuo grids. Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1008

The Fine Tri Corner tool can be used to make linked patterns or on its own. It can also be used with the Fine FlexiDuo grids. Tool handles are manufactured from long lasting polished aluminium. They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1010

The Fine Slot tool can be used to make linked patterns or on its own.  It can also be used with the Fine FlexiDuo grids.  Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1011

The Fine Diamond Duo tool can be used to make linked patterns or on its own.  It can also be used with the Fine FlexiDuo grids.  Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1012

The Fine Grid Square tool can be used to make linked patterns or on its own.  It can also be used with the Fine FlexiDuo grids. Tool handles are manufactured from long lasting polished aluminium. They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1014

The Fine Small Scallop Edge tool can be used to make a scalloped picot edging, the tool is a cutter and like the stamp edge tools will cut the parchment as you go along. Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1015

The Fine Small Semi Circle tool can be used to make decorative perforations. It is a half circle that can be used to make a complete circle when matched both ways. Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1016

The Fine Twig Perforating tool has five needles. Tool handles are manufactured from long lasting polished aluminium. They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1017

The Fine Cross Section - the Large X Shape perforating tool has nine needles. Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1018

Fine Leaf Perforating Tool has six needles in the shape of a leaf. Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1019

The Fine Small Quin perforating tool has five needles one at each corner of a square and one in the centre. Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1020

The Fine 7Needle Tool can be used to make squares, X shapes and also edgings when used with scissors or snips. It can also be used with the Fine FlexiDuo grids. Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1022

The Fine Large Scallop Edge tool can be used to make a scalloped picot edging, the tool is a cutter and like the stamp edge tools will cut the parchment as you go along. Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1023

This is a 3 needle perforating tool (May be used with PCA FINE Straight and Diagonal FlexiDuo Grid and also the PCA-TP100101F Fine Straight EasyEdge Template)

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1024

This is a 4 needle perforating tool (May be used with PCA FINE Straight and Diagonal FlexiDuo grid and also the PCA-TP100101F Fine Straight EasyEdge Template)

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1025

The Fine Hex tool can be used to make linked patterns or used on its own. It can also be used with the fine Honeycomb Grid.  Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1026

The Fine LoveHeart MkII has an additional change where the needle at the base of the heart shape is slightly longer than the other needles. This design change with the longer needle, makes it very easy to locate the tool on the page, over a pattern, or even picking up a previous perforation. Also included with this tool in its original packaging, is a small flexible plastic perforating guide. Using this guide will allow the user to place heart perforations anywhere on the page, and also create straight lines very easily. 

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1027

The Fine Crescent can be used to make linked patterns or on its own.  Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1030

The Fine Large Semi Circle tool can be used to make decorative perforations. It is a half circle that can be used to make a complete circle when matched both ways. Tool handles are manufactured from long lasting polished aluminium.  They are well balanced and comfortable to use and have a tool handle grip that is secure and non-slip.

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1031

9 needle 3 x 3 square shape perforating tool (May be used with PCA FINE Straight and Diagonal FlexiDuo Grid)

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1032

9 needle 3 x 3 square shape perforating tool (May be used with PCA FINE Straight and Diagonal FlexiDuo Grid)

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1035

9 needle small diamond shape perforating tool (May also be used with the PCA-TP103501F Small and Large Diamond Tool Guide Template)

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1036

12 needle large diamond shape perforating tool (May also be used with the PCA-TP103501F Small and Large Diamond Tool Guide Template)

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1037

10 needle small circle perforating tool (May also be used with the PCA-TP103701F Small and Large Circle Tool Guide Template)

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1038

10 needle large circle perforating tool (May also be used with the PCA-TP103701F Small and Large Circle Tool Guide Template)

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1039

 2 needle wide spaced twin perforating tool (May be used with PCA FINE Circle and Oval FlexiDuo Grid)

 LIMITED STOCK-- NO RETURNS /REFUNDS FOR THESE ITEMS

Code: F1040

PCA Fine Medium Quad tool, 4 needle tool. (May be used with PCA FINE Wide Spaced FlexiDuo Grid)